LS-V5000 radio module adopts double phase-lock loop, double VCO structure and high stability TXCO. With advanced arithmetic fault-rectify system, it has high stability and reliability. This module is usually used for industry control, water conservancy, rescue at sea, oil field management, wireless alarm and so on. Moreover, we can extend its functions and ODM products for you according to your specific application.
Features:
Specifications:
Double phase-lock loop, double VCO structure, high stability
Carrier frequency: VHF/UHF selectable
Air data rate: 1200/2400bps now
Interface: TTL/RS-232/RS-485 selectable
Modulation: FSK/MSK
Frequency stability: ±2.5ppm
Channel spacing: 25KHz
Antenna impedance: 50 ohm
Temperature: -30~+70C
Size: 85x58x16mm (without radiator)
Transmission distance can reach 10Km LOS
| Pin No. | Signal Name | Definition | Description | Remarks |
| Power | 1 | VCC | DC12V±10% | Maximum transmission current: 1.5A | |
| 2 | GND | Grounding of power supply | | |
| |
| Signal base | 1 | GND | Grounding of power signal | | |
| 2 | A(TXD) | Data receiving | TTL TX / RS232 TX / RS485－A | Choose one |
| 3 | B(RXD) | Data transmitting | TTL RX / RS232 RX / RS485－B |
| 4 | NC | | | |
| 5 | DGND | Grounding of Signal | | |
| 6 | PTT | Audio transmitting control | | |
| 7 | MIC IN | Microphone input control | | |
| 8 | SPEAKER OUT | Speaker output control | | |
| | 9 | TEST | Factory testing | | |
Receiving parameter:
Receiving sensibility: ≤-119dBm (more than 12dB SINAD)
Adjacent channel selectivity: ≥65dB
Intermodulation rejection: ≥65dB
Clutter and images rejection: ≥70dB
Transmiting parameter:
RF power: 5W
Frequency deviation: ≥ 5.0kHz
Adjacent channel power: ≥70dB
Transmitting current: ≤1.5A
Application of LS-V5000:
APRS, SCADA
Wireless alarm and security systems;
Wireless voice transmission system, wireless pagers
wireless monitoring and process control;
Wireless data transmission, automatic data collection system;
Wireless conference voting system;
Wireless POS, PDA wireless smart terminal;
Electronic bus station and intelligent traffic;
Wireless electronic display screen, LED display
RS232/RS485 to wireless;
How to use the LS-V5000 data radio module
LS-V5000 provides RS-232, RS-485 or TTL level interface port for direct connection with PC, RS485 devices, micro-controller and other UART equipment.
Power supply
LS-V5000 works in supply voltage 12V DC. By using better ripple factor, LS-V5000 transceivers can also share power supply with other equipments. If possible, a voltage-stabilizing chip with 12V voltage is more recommended as the only power supply than switch power supply. But if only switch power supply available, the jam by switch pulse to the transceiver should be avoided. In addition, the reliable grounding must be used if there is other devices in this system. In case of failing to connect with the ground, it can form its own grounding but must be absolutely separated from the municipal electric supply.
Pin Definition
| Pin No. | Signal Name | Definition | Description | Remarks |
| Power | 1 | GND | Grounding of power supply | | |
| 2 | VCC | DC12V±10% | Maximum transmission current: 1.5A | |
| |
| Signal base | 1 | RxD (TTL) | Data receiving of TTL | | |
| 2 | A(TXD) | Data receiving | RS232 TX / RS485－A | Choose one |
| 3 | B(RXD) | Data transmitting | RS232 RX / RS485－B |
| 4 | TxD (TTL) | Data Transmitting of TTL | | |
| 5 | DGND | Grounding of Signal | | |
| 6 | PTT | Audio transmitting control | | |
| 7 | MIC IN | Microphone input control | | |
| 8 | SPEAKER OUT | Speaker output control | | |
| | 9 | TEST | Factory testing | | |
Product Tags:
|
|
5W Wireless Radio Module 144.390MHz APRS Serial Wireless Data Transmission 10km Images
|
